Repair ZIL-5301
Table of possible faults ZIL - 5301 with engine D 245 E3
Troubleshooting algorithm (Remedy)
Problems starting the engine
Disassembling the ZIL-5301 steering cardan shaft
The steering cardan shaft wears very little and should be disassembled only in case of mechanical damage to individual parts
Figure 1 shows the D-245E3 engine control system.
Many questions are asked about the installation of the wiring diagram of the ZIL Bychok turn signals.
That's why I had to cobble together a wiring diagram of the turn signals from the old wiring.
A two-section brake valve is used to control the actuators of the vehicle's service brake system. The two-section brake valve is mounted on the front shield of the cabin.
The injector (Figure 1) is designed to inject fuel into the diesel cylinder and ensure high-quality fuel atomization
The diesel engines use CRIN2 injectors manufactured by BOSCH (Germany).
The pressure regulator (Fig. 1) is designed for automatic regulation of pressure in the pneumatic system within 0.65 - 0.8 MPa, as well as for protecting pneumatic drive units from oil contamination and excessive pressure increase in the event of failure of the regulating device
