The piston pins are installed with tension in the upper heads of the connecting rods and rotate freely in the piston bosses, so heat the upper head of the connecting rod to a temperature of 250˚ C
This article describes the diagnostic procedure used for the air conditioning system of the LADA LARGUS car
Place the vehicle on a lift
For vehicles with air conditioning, bleed the refrigerant from the air conditioning system.
If during movement there is extraneous noise in the area of the rear wheel (usually it is a whistle or howl, which increases with increasing speed, strong heating of the hub), then the bearing is out of order and it needs to be replaced
Put the car on a lift or in an inspection pit
Disconnect the negative battery terminal.
This article describes the diagnostic procedure used for the electronic control unit (ECU) EMS 31.32 of the electronic engine management system (ESM) K7M and K4M
The ignition system of the K4M engine consists of individual ignition coils and spark plugs for each cylinder.
