Throttle Position Sensors

The system with EDP uses two TPS. TPS are part of the throttle body with an electric drive

The control device in the 21129 engine management system is the M86 engine management system controller (KSUD)

Removing and installing the ABS hydraulic unit

Prepare the car for work.

Place the car on a lift, apply the parking brake and turn off the ignition.

Removing and installing the handbrake lever

Prepare the car for work and turn off the ignition.

Open the hood and disconnect the negative terminal of the battery.

Open the cover of the fuse box in the passenger compartment and disconnect the pads of the instrument panel wiring harness from the trunk lock drive switch and from the headlight range control.

Open the hood and use a 10 mm spanner to disconnect the negative battery terminal

Remove the air filter in accordance with the article - "Removing engine intake components"

Replacing elements of the multimedia and navigation systems of the Lada Vesta

The car parking system is designed to detect obstacles located behind the car and warn the driver of the distance to the obstacle with an acoustic signaling device

The Lada Vesta car has two sound signals. One signal is a signal, and the other signal is an alarm

Replacing the trunk light

Prepare the car for work. Disconnect the negative terminal from the battery using a 10 spanner

Replacing lamps and external lights on the rear fenders

Preparing the car for repair. Turn off the ignition.

Lift the hood and use a 10 spanner to disconnect the negative terminal from the battery.

Replacing the front wheel pads

You need to install the front wheel pads on both wheels at the same time. The pads must be from the same manufacturer.

Removing and checking the rear brake drum

Place the car on a lift.

Apply the parking brake and turn off the ignition

Removing the air conditioning condenser

Preparing the car for work

The air conditioning system serves to reduce the temperature and humidity of the air in the car