car ZIL-131
Radiator tubular-ribbon, with oval-section tubes, four-row
Radiator filler cap (Fig. 1) is sealed with two valves; inlet (air) and outlet (steam)
The transfer case is mechanical, has two gears
Gear ratio of first gear 2.08, second gear 1.0
The B10 fuel pump is a diaphragm, sealed, with three outlet and three inlet valves and a lever for manual fuel pumping
The car is equipped with a winch designed to pull the car out when overcoming difficult sections of the road, as well as to provide assistance to other cars stuck on the way
The starting engine heater is designed to warm up the engine before starting it at low ambient temperatures
The clutch of the ZIL-131 car is single-disk, dry, installed in a cast iron housing 8
Installing the ignition during engine assembly, as well as on engines from which the distributor and distributor drive have been removed, must be done in the following order:
