car ZIL-131
The non-contact shielded ignition system is installed on the ZIL-1Z1 car and its modifications
The pistons (Fig. 1) are made of aluminum alloy and coated with tin.
The piston skirt has the shape of an elliptical cone, the large base of which is located at the lower edge of the skirt, and the largest axis of the ellipse lies in the plane perpendicular to the axis of the piston pin.
Radiator tubular-ribbon, with oval-section tubes, four-row
Radiator filler cap (Fig. 1) is sealed with two valves; inlet (air) and outlet (steam)
The compressor is a piston type, non-straight-through, two-cylinder, single-stage compression
The steel camshaft with hardened cams and distributor drive gear is driven by two gears
The vehicle is equipped with power steering, which is combined into a single unit with the steering gear
The oil pump (Fig. 1) is a two-section gear pump.
The upper section of the oil pump supplies oil to the engine lubrication system and to the centrifuge, and the lower section to the oil radiator.
