Repair ZIL-5301
The fuel supply drive device is shown in Fig. 1.
The drive can be disassembled and assembled in any sequence.
When assembling the drive, it must be adjusted in the following order:
Diesel engine D-245 malfunctions of the ZIL-5301 vehicle
Possible malfunctions of the ZIL-5301 diesel engine and its systems
Before checking the installation of the front wheels, check and, if necessary, adjust the axial clearances in the hub bearings and bring the tire pressure to normal
Variant diagram of ZIL-5301 with addition for Euro - 2
Diagram in variant design Euro 2
Adjusting the speed mode of the D-245
To adjust the speed mode of the high-pressure fuel pump, do the following:
Assembly and adjustment of the ZIL-5301 pneumatic hydraulic booster
Assembly of the PGU is carried out in the reverse order of disassembly.
Lubricate the rubber seals of the piston rod and the surface (see Fig. 1) with NG-213 TU 38.101.129-75 liquid.
Maintenance of the D-245 diesel engine
To ensure long-term and trouble-free operation of the diesel engine, the following basic provisions should be followed:
- - periodically check the condition of the fastening of the assembly units;
