To install the winch, you need to weld a frame from a channel or angle of this type
On the frame, we install a shaft with bearings for the cable and guides for the cable
The winch frame itself is attached to the vehicle frame with bolts.
The winch is driven by a power take-off box.
A cardan shaft from a UAZ vehicle, with front-wheel drive.
The winch is switched on using an electro-pneumatic valve.
The winch switch is connected in parallel with the buzzer in the vehicle cabin.
The buzzer is needed so that you don't forget to switch off the winch.
The winch must be reversible.
