car MAZ
MAZ truck manufactured by the Minsk Automobile Plant.
The three-axle tractor unit with mid- and rear-wheel drive and the two-axle tractor unit with rear-wheel drive are equipped with a fifth-wheel coupling and are designed for transporting various cargoes as part of a road train on public roads that allow the axle weights specified in the technical specifications.
The three-axle tractor unit can be equipped with hydraulic equipment for use with specialized and dump semi-trailers.
The three-axle truck and the two-axle truck have a metal platform with folding side and tailboards and are designed for transporting various cargoes on public roads that allow the axle weights specified in the technical specifications.
The trucks can be supplied with a tarpaulin or as a chassis without a cargo platform.
The vehicle is equipped for transporting timber in lengths ranging from 2.0 to 6.0 meters, stacked on a special platform mounted on the vehicle chassis.
This three-axle dump truck with a hydraulically tipped metal body is designed for transporting non-metallic bulk construction materials, such as sand, gravel, soil, crushed stone, and sand-gravel mix, on private roads with a maximum trailer weight of 26 tons. The MAZ-551608 and MA3-5516A8 dump trucks are also available with increased body capacity for transporting grain, wood chips, and other lightweight bulk materials.
The trucks are available with a large or small cabin, a tailboard, or a bucket-type body.
The trucks can be supplied without the body or tipping mechanisms for fitting with various equipment.
Tractor-trailer trucks are designed for use with a semitrailer with connection dimensions in accordance with GOST 12105-74, a Class H50 kingpin in accordance with UNECE Regulation No. 55, pneumatic terminals in accordance with GOST R50023-92, detachable electrical connections in accordance with GOST 9200-76, and a pneumatic brake system that complies with UNECE Regulation No. 13.
Trucks are designed for use with a trailer equipped with a Class D50 drawbar eye, ensuring a seamless coupling.
Adjusting the tension of the drive belts of the MAZ vehicle
The water pump, compressor and generator are driven by V-belts, the normal operation of these units depends on their reliable operation
The wheel drive (Fig. 1) is a planetary gearbox consisting of spur gears with external and internal gearing
Adjusting the central gearbox
Adjust with the gearbox removed in the following sequence:
Installing the cylinder-piston group
Before installation, the liners must be matched to the cylinders and the amount of flange protrusion checked
ABS diagnostics using MAZ light codes
Entering diagnostic mode
To test the system using flashing light codes, you must:
The use of contaminated oils is not allowed.
It is not allowed to engage the gear in the main box until the selected range of the demultiplier turns on, that is, until the control lamp lights up when the slow range is turned on or until it goes out when the fast range is turned on
