car MAZ
Removing the connecting rod and piston group
Number the connecting rods and connecting rod caps in accordance with the number of the cylinder on the side opposite the camshaft (if this is not provided for by the design)
ABS control diagnostics f. Wabco car MAZ
Entering into diagnostic mode
The electronic unit is turned on in the diagnostic mode by pressing the diagnostic button 12 (Fig. ) and holding it on for 0.5 to 3.0 seconds, with the ground switch and the starter and instrument switches on ( the lock must be in the “instrument” position)
The system includes direction indicators, brake signals, identification mark of the road train and equipment for their activation
The MAZ-64227, MAZ-54322 vehicles are equipped with an eight-speed dual-range YaMZ-238A gearbox with synchronizers in all gears except reverse
Removing accessory drive belts and tensioners
In order to remove the alternator, fan and A/C compressor belts, do the following (see Fig. 1):
The vehicles are equipped with service, parking, spare and auxiliary brake systems, as well as devices for connecting the brake system of a semi-trailer with a two-wire pneumatic drive and outputs for supplying other consumers with compressed air
Remove and disassemble the brake valve (Fig. 1) in the following order:
- - remove the brake pedal release spring and disconnect the brake pedal rod from the lever;
