Power units are designed for operation at ambient temperatures from minus 60ºС to plus 50ºС, relative humidity up to 98% at a temperature of 25ºС, air dust content up to 0.4 g / m 3, as well as for movement car in mountainous conditions at an altitude of up to 4500 m above sea level and overcoming passes up to 4650 m above sea level with a corresponding decrease in power and economic indicators.

To assemble the engine, as well as to disassemble it, the engine cylinder block assembled with the clutch housing is fixed on a stand (see Fig. 1)

Before assembly, all engine parts are selected according to size, thoroughly washed, blown with compressed air and wiped with clean napkins

Cylinder block

  • - it is not necessary to remove the engine to remove the cylinder head
  • - to prevent damage to the paintwork of the wings of the body, it is necessary to use a special coating
  • - to prevent damage to the cylinder head, before removing it, you must wait until the engine cools down

The fuel supply system ensures fuel purification and uniform distribution among the engine cylinders in metered portions and at strictly defined moments in time

The fuel supply system filters the fuel and distributes it evenly among the engine cylinders in metered portions at strictly defined moments

KAMA3-740.50-360, KAMA3-740.51-320 engines, designed for installation on single vehicles and truck tractors used as part of road trains, supplied to the domestic market and for export to countries with a moderate and tropical climate, as well as supplied as spare parts

Page 2 of 4