Technical characteristics of cars GAZ-66, GAZ-53
The GA3-66 vehicle is a two-axle truck, with a payload capacity of 2 tons, all-terrain, with drive on both axles. It is designed to replace the same type of GAZ-63 car produced by the plant
Adjustment of backlashes of valves of the engine G4KD and 2,4 l. – G4KE
Checking and adjusting the valve clearance must be done on a cold engine (coolant temperature 20˚С), with the cylinder head mounted on the block
![](/images/stories/gaz66/agaz/sbor10.jpg)
Assembling the engine of the car GAZ-66, GAZ-53
To assemble the engine, as well as to disassemble it, the engine cylinder block assembled with the clutch housing is fixed on a stand (see Fig. 1)
Before assembly, all engine parts are selected according to size, thoroughly washed, blown with compressed air and wiped with clean napkins
![](/images/stories/kamaz/akaz/tor12-fit-200x115.jpg)
Malfunctions of the pneumatic actuator of the KamAZ brakes
Malfunctions of pneumatic drive power supplies
When servicing the pneumatic drive of the car brakes, you must first of all make sure that the system is tight
![](/images/stories/kamaz/akaz/180-fit-200x160.jpg)
Gas distribution mechanism Kamaz
The gas distribution mechanism controls the timely intake of air charge into the cylinders and the removal of exhaust gases from them; consists of valves with springs, a camshaft with gears and parts that transmit movement from the shaft to the valves
![](/images/stories/gazel/agez/ngbc1011.jpg)
Cylinder head ZMZ-402 GAZ-2705
The cylinder head can be removed with the intake pipe and exhaust manifold. If the cylinder head is removed from an engine installed on a car, you must first perform the following operations:
- - drain the liquid from the cooling system;
![](/images/stories/dvig/asys/pts241.jpg)
Assembly of the cylinder block of the G4KD and G4KE engine
Cylinder block
![](/images/stories/kamaz/akaz/1100-fit-200x168.jpg)
Cylinder heads Kamaz
The cylinder heads are separate for each cylinder, made of aluminum alloy. They have water cavities communicating with the same cavities of the cylinder block, inlet and outlet channels, plug-in seats and valve guides.
![](/images/stories/maz/amaz/ogol98.jpg)
Continuation of article 2 assembly of the YaMZ-236/238 diesel engine
Installing cylinder heads, valve rocker arms and adjusting valve clearances
The cylinder head mounting studs are screwed into the right and left rows of the cylinder block, having previously lubricated the threaded holes for the studs in the block with diesel oil
![](/images/stories/kamaz/akaz/diz2-fit-200x133.jpg)
Technical characteristics of the KAMAZ 740.11-240 engine
Cylinder block, drive units and characteristics of engines KAMAZ 740.11-240, 740.13-260, 740.14-300, 740.11-3902007 RE
Technical characteristics of engines 740.11-240, 740.13-260, 740.14-300
![](/images/stories/sis/kuz/lada_granta101.jpg)
Dimensions of openings and mating parts of VAZ vehicles for a tinsmith
The geometry of the repaired body is determined:
- - the size of the gaps on the doors, hood and trunk lid;
- - installation angles of the steered wheels;
- - relative position of suspensions, bridges.
Page 1 of 3