Checking the technical condition of timing parts

Sprockets, hydraulic tensioner, chain guide and tensioner arm

Checking the technical condition of the timing drive

Remove the top cover.

Check the timing belt (A) for damage, oil or coolant ingress

By default, we already have the cylinder head removed

Power units are designed for operation at ambient temperatures from minus 60ºС to plus 50ºС, relative humidity up to 98% at a temperature of 25ºС, air dust content up to 0.4 g / m 3, as well as for movement car in mountainous conditions at an altitude of up to 4500 m above sea level and overcoming passes up to 4650 m above sea level with a corresponding decrease in power and economic indicators.

To assemble the engine, as well as to disassemble it, the engine cylinder block assembled with the clutch housing is fixed on a stand (see Fig. 1)

Before assembly, all engine parts are selected according to size, thoroughly washed, blown with compressed air and wiped with clean napkins

Cylinder block

  • - it is not necessary to remove the engine to remove the cylinder head
  • - to prevent damage to the paintwork of the wings of the body, it is necessary to use a special coating
  • - to prevent damage to the cylinder head, before removing it, you must wait until the engine cools down

Page 1 of 4