Check the angular free play of the steering wheel with the engine idling, shaking the steering wheel until the steering wheels begin to turn
Press the bushings using a special mandrel (see Fig. 1) into the holes of the steering knuckle flush with the surface so that the open ends of the grooves on the bushings are facing the inside of the knuckle (the pressing force must be at least 10 kN)
The pressure regulator (Fig. 1) is designed for automatic regulation of pressure in the pneumatic system within 0.65 - 0.8 MPa, as well as for protecting pneumatic drive units from oil contamination and excessive pressure increase in the event of failure of the regulating device
- Hydraulic brake system units ZIL-5301
- Adjusting the bearing of the drive pinion ZIL-5301
- Shock absorber assembly ZIL-5301
- Cylinder head tightening and valve adjustment D-245E3
- Assembly of the high pressure fuel pump D-245
- Liquid heater for diesel engine ZIL-5301
- Installation of support and pulley D-245