Removing the steering mechanism and adjusting the clearance in the worm bearings
We carry out the work on an inspection ditch or a lift.
Remove the bolt securing the lower universal joint fork of the intermediate steering shaft to the steering gear worm shaft (see Removing the steering column).
- How to remove and install the hood and hood lock of a VAZ-2121
- Design of the VAZ-2121 exhaust gas system
- Checking the level and changing the oil in the VAZ-2121 steering gear
- How to replace the muffler of a VAZ-2121 car
- How to replace elements of the exhaust system of a VAZ-2121 car
- How to replace and check the tension of the VAZ-2121 generator drive belt
- How to replace the coolant pump cover of a VAZ-2121 car
- How to replace the coil and switch of the ignition system of a VAZ-2121 car
- Design and possible malfunctions of the clutch of the VAZ-2121 car
- How to adjust the clutch drive of a VAZ-2121
- Bleeding the clutch and replacing the hydraulic reservoir of the VAZ-2121
- How to remove and repair the clutch master cylinder of a VAZ-2121 car
- Ignition system of a VAZ-2121 car
- Removal and installation of the VAZ-2121 ignition distributor sensor
- Repair of the ignition distributor sensor of a VAZ-2121 car
- Heating and ventilation system of the VAZ-2121 car
- How to remove the heater fan VAZ-2121
- How to remove the heater valve of a VAZ-2121 car
- How to remove a heater radiator with a tap from a VAZ-2121 car
- How to remove parts of the heater of a VAZ-2121 car