car GAZ-2705

To replace the bearing assembly of the upper 5, middle 1 and lower 9 guides, the middle mechanism 13, the side door must be removed.

The car is equipped with a dry, single-disk, constantly engaged clutch with a hydraulic drive of the release mechanism

Removal of the pressure regulator from the car and its repair are carried out if adjustment cannot achieve its correct operation

To remove the regulator you must:

Setting the ignition timing of a GAZ-2705 with a 402 engine

The ZMZ-402 engine is equipped with an ignition distributor sensor (1908.3706) - non-contact, with a control pulse sensor (generator) and built-in vacuum and centrifugal ignition timing regulators

The fluid in the clutch system needs to be replaced after 2 years

We pump the hydraulic drive when replacing the working fluid, as well as to remove air from the system that has entered it during the repair or replacement of individual components