Tie rod joints are replaced if play appears

It is more convenient to carry out work in an inspection ditch

Usually the front beam of a car is removed when the beam bends or twists, as well as other defects that require beam removal

Removing the sliding door and disassembling its moving mechanism

We work together or three, as the door is heavy

Checking the technical condition of the steering

Rotate the steering wheel to set the front wheels to the straight-ahead position

Replacement of springs is required when spring leaves settle or break

Reducing pressure in the power system

Remove the fuel pump fuse from the fuse box

Replacement of the camshaft of the ZMZ-402 GAZ-2705 engine

Remove the fan drive belt

Remove the generator drive belt

Removing the door (how to remove the door, see the article - “Removing, installing and adjusting the sliding door of a Gazelle car”

Checking and adjusting wheel alignment angles is necessary to ensure good stability and controllability of the vehicle and uniform tire wear during its operation

The rear suspension is made on two longitudinal leaf springs with two hydraulic shock absorbers

We remove the front door trim to repair the internal parts of the car door

Replacement of chains and gears of the gas distribution mechanism ZMZ 406 GAZ-2705

You will need: a 6-point hex key, 12-point, 13-point, 14-point sockets, a small chisel, a hammer

The thermal gap between the valves and rocker arms is adjusted when repairing the cylinder head

Also when there is a knocking sound in the area of the valve cover

A feature of the ZMZ-40524 engine ignition system is the presence of four separate ignition coils installed directly on the spark plugs, instead of two separately installed coils serving two engine cylinders each

Removing the window regulator

Remove the door trim (see the article - “How to remove the trim and front door lock of a Gazelle car”)