car GAZ-2705
Setting the ignition timing of a GAZ-2705 with a 402 engine
The ZMZ-402 engine is equipped with an ignition distributor sensor (1908.3706) - non-contact, with a control pulse sensor (generator) and built-in vacuum and centrifugal ignition timing regulators
Replacement of pump and coarse filter GAZ-2705 with engine ZMZ-405, ZMZ-406
Steering column switches
The car uses two steering column switches mounted on the steering column.
On some vehicles, the sound signal is turned on by the turn signal and headlight switches, and on others - by the windshield wiper and washer switch
Replacement of clutch cylinders is mainly associated with the following defects:
- - the clutch does not disengage (the pedal fails);
Removal and installation of the intermediate shaft ZMZ-406 GAZ-2705
The intermediate shaft drives the oil pump. In addition, camshafts are driven through it
It’s more convenient to work together.
Using a slotted screwdriver, pry and tuck the edge of the rubber glass seal behind the edge of the window opening
If the position of the front wheels corresponds to straight-line movement, and the steering wheel spokes are not horizontal, this indicates a violation of the wheel alignment angles, the presence of defects in the steering or suspension
