Replacing the cylinder head cover gasket ZMZ-406 GAZ-2705
Over time, during operation, the gasket under the engine head cover loses its elasticity and strength and oil leaks from under the cover
Removal and installation of the flywheel ZMZ 406 GAZ-2705
The flywheel is removed to replace the rear crankshaft oil seal, to replace it if the toothed rim used to start the engine with the starter is damaged, and to grind the surface under the clutch driven disc
Replacement of exhaust pipes with engines ZMZ-4025, ZMZ-4061, 4026, ZMZ-4063
It is more convenient to work together on an inspection ditch or a lift.
Defection and repair of the ZMZ-402 cylinder block of the GAZ-2705
Inspect the block, if there are cracks, replace it
Cooling system ZMZ-40524 - liquid, closed, with forced circulation of coolant
Removing the bridge from the vehicle must be done in the following sequence:
- - loosen the rear wheel nuts;
In this article we will look at the exhaust gas recirculation system, the exhaust system and the engine mount