Adjusting the carbon monoxide (CO) content in the exhaust gases of ZMZ-406
Adjustment is carried out on a warm engine (coolant temperature 80-90 °C) with a working ignition system and nominal gaps between the electrodes of the spark plugs
Adjust the bearings when axial or radial play appears in the bearings of screw 2. To ensure the presence of these clearances, you must:
Maintenance of the rear axle consists of:
- - periodically checking the oil level in the crankcase, topping it up and changing it according to the lubrication chart;
The speed and timing sensor is located at the front of the engine on the right side
Using the sensor signal, the engine control unit determines the angular position of the crankshaft and its rotation speed
The engine has mod. 406 oil pump is driven from the intermediate shaft, for the engine mod. 402, the pump and ignition distributor are driven from the camshaft
In this article we will look at possible faults in the steering control of a Gazelle car and how to troubleshoot problems
After the first 2500 km and during maintenance-2, and also if the rear wheels of a loaded vehicle lock up earlier than the front wheels or much later when braking on a dry hard surface, you should make sure that the regulator is adjusted correctly