Usually the sheathing and top panel are removed to remove the radiator, to replace the generator drive belts, and also to access other parts of the power plant
Use a 10mm wrench to unscrew the three bolts of the upper grille fastening
Loosen the two bolts of the lower grille fastening.
Remove the radiator grille.
To remove the upper radiator trim, remove the hood lock.
You don’t have to remove the lock, just when we remove the lining, we move it to the side together with the lock drive.
Use a 10mm wrench to unscrew the bolt securing the radiator bracket to the lining.
Using a 12mm wrench, unscrew the four bolts securing the top panel of the radiator trim
Remove the top panel of the radiator trim
Install the grille and cladding panel in reverse order.
