Lada Largus repair

The Lada Largus high-capacity vehicle is a 2006 Dacia Logan MCV, manufactured in Romania, adapted for the Russian market. It is a joint project between Renault and AvtoVAZ. Serial production of the Largus began in April 2012.

The Lada Largus is available in two versions: the five- or seven-seat R90 station wagon with increased capacity and the F90 cargo van.

Lada Largus vehicles are equipped with 1.6-liter gasoline engines: the 8-valve K7M producing 62 kW (84 hp) and the 16-valve K4M producing 77 kW (105 hp).

The vehicles are available in three main trim levels:

Standard (EO);
Normal (E1);
Luxury (E2)

How to replace hydraulic valve lifters on a K4M engine

You will need: the same tools as for replacing the valve stem seals, except for those that are needed directly for replacing them (tools are used only for preparatory operations),

How to remove the intake manifold of the K4M engine

Preparing the car for work. Disconnecting the negative terminal from the battery

Removing the intake silencer.

  1. Disassembling the DPO automatic transmission
  2. How to replace the rear suspension beam Lada Largus
  3. How to remove and install the fuel rail of the K7M engine
  4. How to remove the front passenger airbag Lada Largus
  5. Continuation of the article on the assembly of the K4M engine
  6. How to remove the front suspension stabilizer Lada Largus

Page 45 of 60