car GAZ-2705
In this article we will look at possible faults in the steering control of a Gazelle car and how to troubleshoot problems
After the first 2500 km and during maintenance-2, and also if the rear wheels of a loaded vehicle lock up earlier than the front wheels or much later when braking on a dry hard surface, you should make sure that the regulator is adjusted correctly
In accordance with routine work on the suspension during its maintenance, it is necessary to periodically tighten the nuts of the stepladders, the nuts of the bolts of the rubber-metal hinges, the fastening parts of the spring brackets and shock absorbers
Removal and installation of oil cooler GAZ-2705
An oil cooler is included in the system to cool the oil
Pistons - nominal diameter 100 mm, with a conical recess on the bottom, with a thermostatic insert, cast from an aluminum alloy and coated with tin
The brake caliper is replaced when the parts are significantly worn
If the bracket cylinder jams (significant corrosion of the metal piston of the cylinder appears)
In a steering mechanism with a built-in hydraulic booster, instead of a roller, a three-tooth sector is cut on the bipod shaft, and the role of a worm is played by a screw connected to a piston-rack mounted on two thrust bearings, the preload of which is adjusted by a nut