car GAZ-2705

Also available:

The lubrication system is combined, with oil supplied to the rubbing surfaces under pressure and splashing and automatic control of the oil temperature by a thermal valve

Also available:

Place a container for used oil under the engine crankcase

Unscrew the plug and drain the oil from the crankcase

Also available:

The cylinder block is cast from aluminum alloy and is integral with the upper part of the crankcase.

The block has a water jacket cavity that is open upward, into which cast iron sleeves are inserted with support in the bottom of this cavity

Also available:

To remove the engine, the car must be placed on a viewing hole. The workplace must be equipped with a hoist or other lifting device with a load capacity of at least 300 kg

Also available:

The technical condition of the engine is constantly changing during operation