car GAZ-2705

It is prohibited to coast the car with the ignition off, as this stops the operation of the power steering (power steering), and you can also accidentally lock the steering shaft with an anti-theft device, and the car will become uncontrollable

Adjusting the carbon monoxide (CO) content in the exhaust gases of ZMZ-406

Adjustment is carried out on a warm engine (coolant temperature 80-90 °C) with a working ignition system and nominal gaps between the electrodes of the spark plugs

Adjust the bearings when axial or radial play appears in the bearings of screw 2. To ensure the presence of these clearances, you must:

Maintenance of the rear axle consists of:

• - periodically checking the oil level in the crankcase, topping it up and changing it according to the lubrication chart;

The speed and timing sensor is located at the front of the engine on the right side

Using the sensor signal, the engine control unit determines the angular position of the crankshaft and its rotation speed

The engine has mod. 406 oil pump is driven from the intermediate shaft, for the engine mod. 402, the pump and ignition distributor are driven from the camshaft