car GAZ-2705
Checking and adjusting wheel alignment angles is necessary to ensure good stability and controllability of the vehicle and uniform tire wear during its operation
Repair of carburetor K-151 of GAZ-2705
The carburetor should be removed from the engine mainly to flush it from dirt and resins, since repairs and adjustments of most of its systems and elements can be carried out without dismantling
Adjusting the position of the steering column must be done after adjusting the driver's seat relative to the control pedals. To do this you need:
If, when braking the car with the parking brake, lever 1 (see Fig. 1) with a force of 600 N (60 kgf) or more applied to it is fixed on the uppermost teeth of the sector, then the drive should be adjusted in the following order:
Drain the hydraulic fluid from the hydraulic drive, look - How to pump and replace the hydraulic clutch fluid of a gazelle
The front wheel hubs rotate on two tapered roller bearings 2 and 8 mounted on the steering knuckle
Adjusting the bearing clearance of the rear hub of the GAZ-2705
To adjust the bearings you need:
