You will need: 13 mm, 17 mm, 27 mm wrenches, and a lug wrench.
Disconnect the front propeller shaft from the front axle gearbox (see "Removing and lubricating the Niva propeller shaft").
Remove the master cylinder for replacement or repair if there is a fluid leak, the clutch does not fully disengage (may be caused by a fluid leak or wear of the seals), or if the clutch does not fully engage (as a result of the compensation hole being clogged or blocked by a swollen seal)
You will need: wrenches "10", "13", "14", "17", "19", "21", "22", "36" (or a special wrench for the crankshaft pulley fastening nut, if you don't have such a wrench, you can use a gas wrench), socket heads "12" and "13" (or a special wrench for the cylinder head fastening bolts), screwdriver, hammer, oil filter remover.