The Lada Largus high-capacity vehicle is a 2006 Dacia Logan MCV, manufactured in Romania, adapted for the Russian market. It is a joint project between Renault and AvtoVAZ. Serial production of the Largus began in April 2012.
The Lada Largus is available in two versions: the five- or seven-seat R90 station wagon with increased capacity and the F90 cargo van.
Lada Largus vehicles are equipped with 1.6-liter gasoline engines: the 8-valve K7M producing 62 kW (84 hp) and the 16-valve K4M producing 77 kW (105 hp).
The vehicles are available in three main trim levels:
Standard (EO);
Normal (E1);
Luxury (E2)
The compressor pulley is mounted on a double-row ball bearing.
When pressing out, the bearing is destroyed, so we press it out only for replacement
- How to repair the cylinder head of the K4M engine
- How to repair a heater in a Lada Largus
- How to remove the JH3 gearbox of a Lada Largus
- How to assemble a JH3 gearbox
- Checking and replacing the timing belt of the K7M engine
- How to remove the air conditioning compressor of a Lada Largus
- How to remove and install the K4M engine pump
- How to replace silent blocks of a Lada Largus beam
- Operating principle and repair of the hydraulic unit of the automatic transmission DPO (AL4)
- How to disassemble the JH3 gearbox
- Operating principle and replacement of the ECU controller Lada Largus
- How to remove bumpers of a Lada Largus car
- Continuation of the article on the assembly of the K4M engine
- How to Replace K4M Powertrain Mounts
- Design of drives with gearbox JH3 Lada Largus
- How to remove and check the rear brake regulator Lada Largus
- How to remove oxygen concentration sensors of a Lada Largus car
- How to replace the dust boots of the drive shafts of the wheels of Lada Largus
- How to assemble the K4M engine SHPG
- How to remove the muffler and air filter of the K4M engine
