• Auto-hand
    • Lada Granta
    • Lada Kalina
    • VAZ-2121
    • Lada-Largus
    • Lada Priora
    • Lada Vesta
  • separator
    • GAZ-66
    • GAZ-2705
    • GAZ-3110 (Volga)
  • Separator-2
  • Engines
    • UAZ 3151
    • Niva Chevrolet
    • ZIL-5301
    • MAZ
    • Ural car
    • ZIL-131
    • Auto PAZ
    • Kamaz
  • Separator-3
  • Systems
  • separator-4
  • search

Select your language

  • Русский
  • Қазақша (kk-KZ)
  • Українська (Україна)
  • Español (España)
  • German (DE)
  • English (UK)

How to remove, disassemble and adjust the steering column of a Gazelle car

How to remove, disassemble and adjust the steering column of a Gazelle car If the position of the front wheels corresponds...

Crank mechanism ZMZ-406 GAZ-2705

Crank mechanism ZMZ-406 GAZ-2705 Pistons are cast from high-silicon aluminum...

How to adjust the power steering gear of a Gazelle car

How to adjust the power steering gear of a Gazelle car Adjustment of the steering mechanism is...

Oil pump drive GAZ-2705

Oil pump drive GAZ-2705 The engine has mod. 406 oil pump is driven from...

Assembly and adjustment of the axle gearbox of the Gazelle car

Assembly and adjustment of the axle gearbox of the Gazelle car We discussed dismantling the axle gearbox in the...

Flushing the valves of the GAZ-2705 hydraulic booster pump

We clean the pump from dirt from the outside. We drain the oil from the system, article - Changing the oil in the GAZ-2705 power steering

Engine ventilation UMZ-4215 GAZ-2705

The engine has a closed crankcase ventilation system, operating due to vacuum in the intake pipe and air filter

The diagram of the crankcase ventilation system is shown in the figure

Removal and installation of the ZMZ-402 GAZ-2705 engine

The need for engine repair occurs after a mileage of about 150,000 km

Front wheel hub GAZ-2705

The front wheel hubs rotate on two tapered roller bearings 2 and 8 mounted on the steering knuckle

Window regulator GAZ-2705

To move the sliding window and hold it in any position, use a window lift - cable type, self-braking, with a central guide

Hood mount GAZ-2705

To hold the hood in the closed position when the car is moving, use a pin-type hood lock 9, which is attached to the top panel of the radiator

How to remove and install a Gazelle car heater

The Gazelle car heater consists of a plastic casing in which a radiator, two fans mounted on the electric motor shaft, upper, central and lower dampers and a control panel with three levers and switches are installed

Page 24 of 43

  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28