The frequency of replacing the air filter element is 10 thousand kilometers.

If you frequently drive on dusty roads, you need to change the filter element more often.

If the filter is heavily contaminated, it has increased resistance to air passage, causes excessive fuel enrichment and therefore reduces engine power.

Periodically, you need to remove the filter element and clean it of dust by vigorously shaking it or blowing it with compressed air in the direction opposite to the air movement when the engine is running.

Replacing the filter element of the ZMZ-402 engine air filter

Replacing the air filter of the ZMZ-402 engine

Use a screwdriver to loosen the clamp on the crankcase exhaust hose

Replacing the air filter of the ZMZ-402 engine

Remove the crankcase gas exhaust hose.

Replacing the air filter of the ZMZ-402 engine

“Snap off” the five spring clips securing the air filter cover

Replacing the air filter of the ZMZ-402 engine

Remove the cover.

Remove the filter element and clean the housing from dust and debris.

Replacing the air filter of the ZMZ-402 engine

Insert a new filter element and install the cover, aligning the arrows on the body and cover

Removing the air filter housing of the ZMZ-402 engine

Take out the filter element.

Removing the air filter housing of the ZMZ-402 engine

Using a slotted screwdriver, loosen the clamp securing the corrugated air intake hose and remove the hose.

Removing the air filter housing of the ZMZ-402 engine

Use a screwdriver to bend the antennae of the lock washers securing the air filter housing.

Removing the air filter housing of the ZMZ-402 engine

Use a 10mm wrench to unscrew the three fastening nuts.

Removing the air filter housing of the ZMZ-402 engine

Remove the ring plate.

Removing the air filter housing of the ZMZ-402 engine

Remove the air filter housing

Removing the air filter housing of the ZMZ-402 engine

Do not lose the three bushings inserted into the rubber seal of the filter housing

Install the filter housing in reverse order.

Replacing the filter element of the air filter of the ZMZ-406 engine

Replacing the air filter element of the ZMZ-406 engine

Use a screwdriver to loosen the screw of the air duct clamp and remove the clamp.

Replacing the filter element of the air filter of the ZMZ engine -406

Remove the rubber air duct from the air filter housing.

Replacing the air filter element of the ZMZ-406 engine

Using wrenches 10 and 13, unscrew the nuts of the housing clamp.

Replacing the air filter element of the ZMZ-406 engine

Unscrew the wing nut from the bottom of the filter housing and remove the upper half of the housing along with the filter element.

Replacing the air filter element of the ZMZ-406 engine

Use a 17mm wrench to unscrew the nut securing the filter element

Replacing the air filter element of the ZMZ-406 engine

Having removed the sealing rubber washer, remove the filter element

Install a new filter element and assemble the air filter in reverse order.

A filter of a different design can be installed on some vehicles with a ZMZ-4062 engine.

new

The lubrication system diagram is shown in Fig. 1. Oil pressure in the lubrication system of a warm engine at low crankshaft speed 550–650 min -1

In the article we will consider possible malfunctions of the front axle of the UAZ-3151