With the engine running and the vacuum booster in working order, the brake pedal when braking should not reach the floor of the cabin - the gap between the pedal and the floor should be at least 40 mm
Disconnect the wire from the negative terminal of the battery
Disconnect the accelerator cable from the throttle sector
Brake light switch
The brake light switch is installed on the side of the brake pedal
Electrical equipment diagram of GAZ-3302 and GAZ-2705 cars with ZMZ-406 engines
Scheme GAZ 2705
Checking the technical condition of the steering
Rotate the steering wheel to set the front wheels to the straight-ahead position
Removal, repair and installation of oil pump GAZ-2705
Drain the oil from the engine crankcase
Remove the oil sump
If, when braking the car with the parking brake, lever 1 (see Fig. 1) with a force of 600 N (60 kgf) or more applied to it is fixed on the uppermost teeth of the sector, then the drive should be adjusted in the following order:
