The camshaft position sensor (0232103006 or 406.3847050-10) is installed in the end of the cylinder head on the left side of the flywheel
High voltage wires are made of PV PPV wire with a diameter of 8 mm
A helix of nichrome wire is wound on a core with a ferrite filler
The VAZ-21126 engine is based on the VAZ-2112 engine
Increasing engine displacement mod. 21126 up to 1.6 l compared to displacement mod. 2112 is achieved by increasing the piston stroke while keeping the cylinder diameter unchanged.
- Replacing the crankshaft seals VAZ-21126
- Replacing the gasket of the collector of the VAZ-21126 engine
- Replacing the intake manifold seals VAZ-21126
- Replacing the timing of the G6EA engine
- G6EA engine valve clearance adjustment
- G4KE Engine Compression Check
- Adjustment of backlashes of valves of the engine G4KD and 2,4 l. – G4KE