Repair ZIL-5301

Also available:

Adjustment of the D-245 boost corrector

The rod movement should begin when the air pressure in the above-diaphragm space is 0.005-0.010 MPa

Also available:

When determining the condition of the rear axle by noise, you should make sure that the sound is coming from the axle

Also available:

The hydraulic drive pressure regulator on vehicles with a split drive on the sides is designed to adjust the brake fluid pressure when braking the vehicle in order to prevent the rear wheels from locking when the vehicle is partially loaded

Also available:

Assembly and installation of the ZIL-5301 gearbox

Assembly and installation of the intermediate shaft

Install key 8 in the shaft grooves and sequentially press the second gear pinion (0.005-0.055 mm interference), reverse gear (fit from 0.04 mm interference to 0.01 mm clearance), third and fourth gear pinions (0.015-0.065 mm interference), pre-selected by journals, onto the shaft.

Also available:

A two-section brake valve is used to control the actuators of the vehicle's service brake system. The two-section brake valve is mounted on the front shield of the cabin.