The air conditioning system serves to reduce the temperature and humidity of the air in the car

Prepare the car for work.

Place the car on a lift or inspection pit, as you will have to remove the front bumper.

Prepare the car for work. Install it on a viewing pit or lift.

Open the hood and disconnect the negative battery terminal.

Place the vehicle in a work area, apply the parking brake, and turn off the ignition.

Lift the hood, disconnect the ground wire from the battery.

Technical characteristics of the generator TG 12C209 f. "Valeo":

Maximum output current (at 14 V and 6000 min ^-1), A 120

Place the car on a lift or inspection pit.

Disconnect the negative battery terminal.

Prepare the car for work.

Place the car on an inspection pit or lift. Disconnect the negative battery terminal.

The engine cooling system of the Lada Vesta is closed type under pressure.

There is a safety valve in the expansion tank cap.

Remove the supports if they are worn out or when dismantling the powertrain units

Exhaust gases are discharged from the engine through the exhaust pipe of the muffler with the neutralizer assembly, the additional muffler and the main muffler

We remove the ramp to check the injectors and flush the ramp itself, as well as to repair the engine and its systems

Prepare the car for work.

Place the car on a lift or in an inspection pit.

Prepare the car for work. Install it on a lift or in an inspection pit. Disconnect the negative battery terminal.

Change the tension roller if extraneous noise appears when it rotates

Replacing the generator drive belt of the Lada Vesta with a VAZ-21129 engine

We remove the belt for its replacement or for work related to the replacement of drive units, as well as when replacing the timing belt

Removing the heating and air conditioning unit

Prepare the car, open the hood and disconnect the negative battery terminal.

Prepare the car for work, disconnect the negative terminal of the battery.

Removing the front seat

Preparing the car for work

Removing the windshield trim

The windshield pillar trim is secured with three plastic holders