car GAZ-3110
The piston of the 1st cylinder is set to the top dead center (TDC) position of the compression stroke so that when carrying out work related to removing the timing chains, the valve timing is not disturbed.
Since hydraulic tensioners constantly keep the chains in tension, regardless of chain stretch and shoe wear, there is no need to adjust the chain tension during operation
Die Instrumententafel eines Wolga-Autos wird normalerweise bei Karosseriearbeiten sowie bei der Reparatur der Heizung usw. entfernt.
The frequency of replacing the air filter element is 10 thousand kilometers
If you frequently drive on dusty roads, you need to change the filter element more often
Washing the flow and safety valves of the GAZ-3110 power steering pump
Clean the outside of the pump from dirt
Drain the oil from the system (see “Replacing the GAZ-3110 power steering oil”)
Engine injectors are removed for inspection or replacement
Generators 1631.3701 or 192.3771 do not have a built-in voltage regulator and work in conjunction with a transistor voltage regulator type 13.3702–01, which has electronic protection against short circuits in the generator excitation winding circuit
