Work with an assistant on an inspection ditch or overpass
Drain the oil from the gearbox.
Disconnect the wire terminal from the negative terminal of the battery.
The car is equipped with two braking systems - service and parking
The car has a semi-independent rear suspension, made on an elastic beam with longitudinal arms, cylindrical springs and double-acting telescopic shock absorbers
Disassembling the gearbox primary shaft
Disassembling the shafts is discussed in the article - "Disassembling and assembling the Lada Priora gearbox"
The additional resistor is used to obtain different rotation speeds of the heater fan motor
If the additional resistor fails, replace it
Replace or check the solenoid if the reverse gear does not engage
You will need: a special 10 mm wrench for unscrewing the brake pipe nuts, a 15 mm wrench.
Remove the corresponding wheel.