If it is necessary to remove the adsorber, you must first remove the fuel tank, as shown in the article - “Removing the tank.”
But you can remove the adsorber if you lower the tank a little on an adjustable stand
Most of the car's electrical circuits are protected by fuses
The crankshaft position sensor is designed to generate signals by which the ECU synchronizes its operation with the engine operating cycle
The brake mechanism of the rear wheels is drum, with a two-piston wheel cylinder and automatic adjustment of the gap between the shoes and the drum
The generator is mounted on a bracket fixed to the engine
The generator is attached to the bracket with two bolts and nuts
The head of the upper bolt is kept from turning by two protrusions on the bracket
To check the condition of the wheel bearings, you need to hang the wheel and rotate it by hand
The wheel should rotate evenly, without jamming or knocking
The canister purge valve is installed on the air filter housing
