Usually the ignition switch is removed to replace it, as well as to replace the contact group of the switch or the APS coil
Removing the front wheel drives
We carry out the work on an inspection ditch or overpass
Front wheel drive seals can be replaced without removing the gearbox
If it is necessary to remove the adsorber, you must first remove the fuel tank, as shown in the article - “Removing the tank.”
But you can remove the adsorber if you lower the tank a little on an adjustable stand
Most of the car's electrical circuits are protected by fuses
The crankshaft position sensor is designed to generate signals by which the ECU synchronizes its operation with the engine operating cycle
The brake mechanism of the rear wheels is drum, with a two-piston wheel cylinder and automatic adjustment of the gap between the shoes and the drum