Lada Kalina car repair
To disassemble the gear motor, unscrew the screws securing the gearbox cover 6 and remove it together with the limit switch panel 4
One of the reasons for the car skidding or pulling to the side when braking may be a malfunction of the pressure regulator
It is recommended to replace a faulty pressure regulator as an assembly.
Front door repair involves replacing door elements
To remove the cable, you will need to remove the air filter (article – “Replacing air filters”)
To better see how this is done, the work is shown with the instrument panel removed.
To determine the destruction of the bearing, you need to jack up the car from the side being tested until the wheel lifts off the road
Disassembling the gearbox input shaft
The dismantling of shafts is discussed in the article - “Repair of the gearbox of a Lada Kalina”
Clamp the input shaft in a vice with soft metal jaw linings.
We carry out the work on an inspection ditch or overpass with an empty tank
We carry out the work with an assistant. You can do without an assistant, but you will need a height-adjustable stop or stand