Lada Kalina car repair
The LADA KALINA is a five-seat passenger car with a front-engine, front-wheel drive, and an all-metal welded monocoque body.
The LADA KALINA meets passive safety requirements.
The front and rear bumpers are made of impact-resistant polypropylene, which absorbs impact energy in a collision. A crossbar is located at the front of the car under the dashboard. The B-pillar, roof, and sills are reinforced. All doors have metal crossbars for additional rigidity.
The standard configuration includes electric power steering, significantly improving control. For added convenience and safety, a wide range of options is available: driver and passenger airbags, seatbelt pretensioners, anti-lock brakes, air conditioning, fog lights, power-folding outside mirrors, and heated front seats.
The vehicles are equipped with a four-cylinder, in-line, four-stroke, eight-valve VAZ-21114 engine with a displacement of 1.6 liters and electronically controlled multipoint fuel injection. All vehicles are equipped with a catalytic converter, which enables them to meet current Euro-2 or Euro-3 emission standards, depending on the configuration.
If the starter does not work when the ignition key is turned to position “II”, there may be a malfunction of both the starter itself and its activation circuit
Checking the effectiveness of the brake system
In accordance with clause 1.1 of the “List of malfunctions and conditions under which the operation of vehicles is prohibited,” the braking distance of a vehicle when pressing the brake pedal once from a speed of 40 km/h should be no more than 12.2 m
To disassemble the gear motor, unscrew the screws securing the gearbox cover 6 and remove it together with the limit switch panel 4
One of the reasons for the car skidding or pulling to the side when braking may be a malfunction of the pressure regulator
It is recommended to replace a faulty pressure regulator as an assembly.
Front door repair involves replacing door elements
To remove the cable, you will need to remove the air filter (article – “Replacing air filters”)
To better see how this is done, the work is shown with the instrument panel removed.
