The canister purge valve is installed on the air filter housing
Checking the performance of the interior heater
Start the engine.
Turn the air temperature control knob counterclockwise to the extreme position (blue sector).
The pressure in the engine power supply system can be checked with a conventional pressure gauge (for example, from a tire pump)
If the starter does not work when the ignition key is turned to position “II”, there may be a malfunction of both the starter itself and its activation circuit
Checking the effectiveness of the brake system
In accordance with clause 1.1 of the “List of malfunctions and conditions under which the operation of vehicles is prohibited,” the braking distance of a vehicle when pressing the brake pedal once from a speed of 40 km/h should be no more than 12.2 m
To disassemble the gear motor, unscrew the screws securing the gearbox cover 6 and remove it together with the limit switch panel 4
One of the reasons for the car skidding or pulling to the side when braking may be a malfunction of the pressure regulator
It is recommended to replace a faulty pressure regulator as an assembly.
Front door repair involves replacing door elements
To remove the cable, you will need to remove the air filter (article – “Replacing air filters”)
To better see how this is done, the work is shown with the instrument panel removed.
To determine the destruction of the bearing, you need to jack up the car from the side being tested until the wheel lifts off the road
Disassembling the gearbox input shaft
The dismantling of shafts is discussed in the article - “Repair of the gearbox of a Lada Kalina”
Clamp the input shaft in a vice with soft metal jaw linings.
We carry out the work on an inspection ditch or overpass with an empty tank
We carry out the work with an assistant. You can do without an assistant, but you will need a height-adjustable stop or stand
Removing the engine screen
Relieving pressure in the power system
Lada Kalina is a five-seater passenger car with a front engine, an all-metal welded body of a supporting structure, and front-wheel drive
Structurally, the windshield wiper of a Lada Kalina car consists of an electric motor, levers, brushes and hinges
We remove the trunk lock for replacement or repair
It is convenient to carry out the work in an inspection ditch. But if necessary, you can remove and install the spring and shock absorber of the rear suspension by placing the car on a flat horizontal platform
