Lada Kalina car repair
The brake mechanism of the rear wheels is drum, with a two-piston wheel cylinder and automatic adjustment of the gap between the shoes and the drum
The generator is mounted on a bracket fixed to the engine
The generator is attached to the bracket with two bolts and nuts
The head of the upper bolt is kept from turning by two protrusions on the bracket
To check the condition of the wheel bearings, you need to hang the wheel and rotate it by hand
The wheel should rotate evenly, without jamming or knocking
The canister purge valve is installed on the air filter housing
Checking the performance of the interior heater
Start the engine.
Turn the air temperature control knob counterclockwise to the extreme position (blue sector).
The pressure in the engine power supply system can be checked with a conventional pressure gauge (for example, from a tire pump)
If the starter does not work when the ignition key is turned to position “II”, there may be a malfunction of both the starter itself and its activation circuit
