Kamaz car
We replace the springs if there is damage or loss of elasticity of the sheets
This article will cover the removal and installation of the balance shaft, and replacement of the reaction rods
The rear suspension of three-axle cars is balanced on two springs.
With such a suspension, the intermediate and rear axles swing relative to the balancer axis
The electric torch device (EFD) is designed to facilitate starting a cold engine at ambient temperatures down to -30 °C
Design and operation of supply line devices
The pneumatic drive of the brake mechanisms (Fig. 1) has a source of compressed air - compressor 1
The centrifugal oil filter (Fig. 1) is bolted to the front crankcase cover on the right through a gasket so that the inlet “A” and outlet “B” to “C” channels are aligned with the corresponding channels in the cover
The accelerator valve supplies compressed air to the energy accumulators and is designed to reduce the response time of the parking and spare brake drive by reducing the length of the compressed air inlet line into the spring energy accumulators and releasing it from them into the atmosphere
