The full-flow oil filter (Fig. 1) is secured with three bolts to the right side of the lower part of the crankcase through a gasket and consists of a housing 11, caps 17 and two filter elements
The exhaust system is designed to release exhaust gases into the atmosphere
Possible malfunctions of the Kamaz heater
Failure of the heater and improper handling of it can cause a fire
The compressor is piston type, two-cylinder, single-stage compression, with a capacity of 220 l/min at a crankshaft speed of 2000 rpm and a back pressure of 700 kPa; installed on the front end of the flywheel housing.
Maintenance of the clutch consists of periodically checking and adjusting the clutch supply, as well as tightening the fastening connections of the pneumatic amplifier and checking the tightness of the drive
A single safety valve maintains pressure in the receivers of the towing vehicle during an emergency decrease in pressure in the supply line of the trailer, and also prevents the release of compressed air from its line when the pressure in the brake drive of the towing vehicle drops, preventing automatic self-braking of the trailer.
Clutch drive of KamAZ vehicle
Clutch drive is remote, hydraulic with pneumatic booster.
The pneumatic booster makes it much easier for the driver to disengage and hold the clutch in the disengaged state.