The vehicle can be equipped with springs consisting of three sheets with an additional leaf installed, or springs consisting of five sheets with additional springs of three sheets
Elements of the K-151 carburetor
The K-151D carburetor, installed on a car with a ZMZ-4063 engine, has two adjacent vertical channels (chambers) for air passage, in the lower part of each of which a rotary throttle valve is installed
Locks are used to hold doors in a closed position while driving, in a parking lot, and in the event of a traffic accident
The main brake cylinder, with two sequential pistons 10 and 17 and a two-section reservoir 4 with sensor 6 for an emergency brake fluid level drop indicator, is attached to the cover of the vacuum booster
In a car cabin with three rows of seats, an additional heater is located on the floor behind the passenger seat (or under it)
Press ball bearings 1 and, if necessary, pressed-on gear rings from the intermediate shaft
Install the secondary shaft in a vertical position
Remove retaining ring 1 and spring ring 2 of the 3rd and 4th gear synchronizer