car UAZ-3151
The UAZ-3151, -31512, -31514, and -31519 are two-axle, all-wheel-drive, cargo-passenger vehicles with an all-metal bonnet-type body mounted on a frame. The body is available with a hardtop or soft (canvas) top.
The vehicle seats seven, including the driver, with the two rear passengers facing each other on folding seats.
When the rear seats are folded, a cargo compartment is created in the rear.
The UAZ-3151 can seat from four to eight passengers, depending on the number and arrangement of the seats.
The gasoline engine, a four-cylinder in-line engine with a displacement of 2.445 or 2.89 liters, is mounted longitudinally in the front of the vehicle.
The vehicle's transmission features a disconnectable front axle and a downshifting gear in the transfer case. The front axle is equipped with clutches that disconnect the drive from the wheels.
The axles can be equipped with additional wheel reduction gears, which increases ground clearance from 220 to 300 mm.
The vehicles are equipped with stamped steel wheels with a 15- or 16-inch rim diameter and all-terrain tires.
In the article we will consider possible malfunctions of the rear axle of the UAZ-3151
Place the vehicle on a platform or inspection ditch to gain access from below to the gearbox and clutch
Repair of connecting rods comes down to replacing the upper head bushing and then processing it to fit a piston pin of a nominal size or to processing the bushing available in the connecting rod for a repair-size pin
G250P2 generator and generators 665.3701–01 and 161.3771:
Repair the carburetor if any of its parts break or if the carburetor performs unsatisfactorily after adjustment in all engine operating modes
Repair of the crankshaft consists of regrinding the main and connecting rod journals to the next repair size
