car UAZ-3151
If the amplifier fails, only the force from the driver’s foot is transmitted to the pistons of the master cylinder through pusher 33 (see Fig. 1), control valve, buffer 20 and rod 7
During operation, it may be necessary to adjust the full opening of the carburetor throttle valve and the position of the pedal
Disconnect the wire from the negative terminal of the battery.
Remove the distributor cap.
Axles with final drives (Fig. 1 and 2) are installed as a complete set (front and rear) on modifications of vehicles of the UAZ-31512 family with simultaneous replacement of the rear propeller shaft
The hydraulic clutch release (Fig. 1) of vehicles of the UAZ-31512 family consists of a suspended pedal 19, a master cylinder 5, a hydraulic pipe 4, a hydraulic hose 24 and a working cylinder 25