car GAZ-3110
Disassembly and assembly of the intermediate shaft of the GAZ-3110 gearbox
Press ball bearings 1 and, if necessary, pressed-on gear rings from the intermediate shaft
Disassembly and assembly of the input shaft of the GAZ-3110 gearbox
Remove the locking ring if it remains on the input shaft.
Install the secondary shaft in a vertical position
The gearbox is removed for repair, as well as for repair of clutch parts
The frequency of oil changes is 60 thousand km
It is recommended to drain the oil immediately after the trip
The car has a rear axle with a continuous beam
