Press ball bearings 1 and, if necessary, pressed-on gear rings from the intermediate shaft
Install the secondary shaft in a vertical position
Remove retaining ring 1 and spring ring 2 of the 3rd and 4th gear synchronizer
We replace brake pads simultaneously on both front wheels of the car by reducing the thickness of the linings to 3 mm
The control unit has a self-diagnosis mode, which can be used to determine faults in the system.
The cylinder block is cast from aluminum alloy and is integral with the upper part of the crankcase.
The block has a water jacket cavity that is open upward, into which cast iron sleeves are inserted with support in the bottom of this cavity
Heating is provided by air heated in heater radiators.
Outside air enters the main heater through a grille located between the windshield and the hood
Usually the sheathing and top panel are removed to remove the radiator, to replace the generator drive belts, and also to access other parts of the power plant