engines
If the gasket is leaking, the exhaust gases break out, accompanied by a characteristic sound (“cut” collector)
Replacing the oil sump seal ZMZ-406
If an oil leak through the oil pan gasket cannot be eliminated by tightening its fastening bolts, it means that the gasket is severely deformed and must be replaced
Replacing the front crankshaft seal
A sign of the need to replace the front crankshaft oil seal is an oil leak through its edge
Replacing the cylinder head gasket ZMZ-406
The cylinder head gasket is replaced if it is damaged
Replacing the cylinder head cover gasket ZMZ-406
Over time, during operation, the gasket under the engine head cover loses its elasticity and strength and oil leaks from under the cover
Removal, inspection and installation of the ZMZ-406 flywheel
The flywheel is removed to replace the rear crankshaft oil seal, to replace it if the toothed rim used to start the engine with the starter is damaged, and to grind the surface under the clutch driven disc
Since the hydraulic tensioners keep the chains constantly taut, regardless of chain stretch or shoe wear, there is no need to adjust the chain tension during operation
