Flywheel ZMZ-406

Removal, inspection and installation of the ZMZ-406 flywheel

The flywheel is removed to replace the rear crankshaft oil seal, to replace it if the toothed rim used to start the engine with the starter is damaged, and to grind the surface under the clutch driven disc

  1. Head cover gasket ZMZ-406
  2. Pan gasket ZMZ-406
  3. Exhaust manifold gasket ZMZ-406
  4. Intermediate shaft ZMZ-406
  5. Cylinder block ZMZ-406
  6. Adjustment of CO ZMZ-406
  7. Replacing the throttle ZMZ-406
  8. Replacement of the idle speed regulator ZMZ-406
  9. Replacing the pressure reducing valve ZMZ-406
  10. Replacing the synchronization sensor ZMZ-406
  11. Shaft drive ZMZ-406
  12. Replacing the pump ZMZ-406
  13. Oil pump drive ZMZ-406
  14. Replacing the oil filter ZMZ-406
  15. Setting the TDC of the VAZ-21126 engine

Page 2 of 137